CSR1000v - Invalid Value for Multicast route-limit

[paulkevinrengifosandoval7870]

Hello everyone,

I have a problem:

When i try sync my CSR1000v with NSO i get this error.

i dont any Multicast configuraction in my CSR1000v, but the yang model set by default this value

Is this problem familiar to you?

Thanks for your help

Best regards 

Kevin Rengifo

[snovello]

Hello Kevin,

the problem you describe may be an issue with the device, i.e. simply the device is reporting this error. I would turn on ned tracing for this device to check that.

I've looked at the yang model here revision 2019-07-01 and this value is in range but there is no default for this leaf. So its not purely a yang issue, but could be something like a mismatch between the capability of the device and what the model describes.

Realize I'm being a little vague here, but its hard to tell for sure from the info you posted.

You mention that you are not even using multicast. In that case a quick solution may be to  exclude this yang module from the NED you use.

Best regards

Stefano