06-28-2019 10:24 AM
I have NCS 4.7.2 with IOSXR 4.7.11 and I am seeing where I am not seeing all the output service policies for a given interface, example :
Router config:
interface TenGigE0/0/0/22
description Ntwk_to_ASR9904-1_te0/1/0/4
mtu 9216
service-policy input CORE-INGRESS
service-policy output CORE-EGRESS-MARK
service-policy output CORE-EGRESS-QUEUE
ipv4 address 192.168.185.182 255.255.255.252
load-interval 30
NSO Config:
cisco-ios-xr:interface TenGigE 0/0/0/22
description Ntwk_to_ASR9904-1_te0/1/0/4
mtu 9216
service-policy input CORE-INGRESS
service-policy output CORE-EGRESS-QUEUE
ipv4 address 192.168.185.182 255.255.255.252
no shutdown
load-interval 30
Is the IOSXR the correct NED to be using and or is there something different I should be doing to get NSO to recognize that there are two output policies?
Solved! Go to Solution.
06-29-2019 12:00 PM
There was a slight difference in the command:
devices device X ned-settings cisco-iosxr api service-policy-list true
but that worked. Thank you for the information.
06-29-2019 12:10 AM
06-29-2019 07:09 AM
I am using NCS-4.7.2-cisco-iosxr-7.11
06-29-2019 10:33 AM
06-29-2019 12:00 PM
There was a slight difference in the command:
devices device X ned-settings cisco-iosxr api service-policy-list true
but that worked. Thank you for the information.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide