NSO always alert out-of-sync even if I just run sync-from

[haofan]

Hi Experts,

I have a CBR8 and config cisco-ios transaction-id-method config-id (not using config-hash)
ned-settings cisco-ios read transaction-id-method config-id.

After run sync-from, then run check-sync it alert out-of-sync. But when I use transaction-id-method config-has, doesn't have this issue. 

admin@ncs# devices device _DEVICE_80.3.1.41 sync-from          
Wed Sep  5  18:29:06.912 UTC+00:00
result true
admin@ncs# devices device _DEVICE_80.3.1.41 check-sync         
Wed Sep  5  18:29:21.220 UTC+00:00
result out-of-sync
info got: bea32ddc75ce6502461b82082634ed27 expected: dfe9066cc4a24cfa3afec1509f899f9d

admin@ncs# *** ALARM out-of-sync: got: bea32ddc75ce6502461b82082634ed27 expected: dfe9066cc4a24cfa3afec1509f899f9d

CBR8 show configuration id: 

Infra_C05#show configuration id 
Load for five secs: 20%/1%; one minute: 17%; five minutes: 15%
No time source, *09:31:32.405 UTC Thu Sep 6 2018

version:3595 time:2018-09-05T15:55:42.253Z

Infra_C05#show configuration id 
Load for five secs: 10%/1%; one minute: 15%; five minutes: 15%
No time source, *09:35:49.244 UTC Thu Sep 6 2018

version:3595 time:2018-09-05T15:55:42.253Z

If need reproduce env,

please ping me: haofan@cisco.com

[rogaglia · Accepted solution]

Hi Hao,

Looks like you are having a very specific problem with the NED and your setup. I would recommend you to start a TAC ticket as they are the best positioned to help you.

Roque