cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
261
Views
5
Helpful
3
Replies

NSO - IOS-XE AAA yang model compiling end with silent error

LoicChabert27318
Beginner
Beginner

Hi !

 

I'm currently using Cisco NSO product to develop Ipsec tunnels gateway. I have compile all mantadory yang models, extracted from netconf-ned-builder tool.

Unfortunatly, when i add AAA yang models, NED build process end with an error, but without any details. How can i get more details about the error ?

 

Please find more details below:

NSO version: 5.7.1

Netconf target: CSR1000v 17.3.3

Build error:

make all
/home/noc/nso/5.7.1/bin/ncsc --ncs-compile-bundle yang                   \
    --ncs-device-dir ncsc-out                        \
                                  \
                            \
                                \
    --ncs-device-type netconf                        \
                                         \
    --ncs-ned-id cisco-iosxe-nc-1.2:cisco-iosxe-nc-1.2                                   \

internal error
make: *** [Makefile:51: ncsc-out/.done] Error 1

I have tried to add more debug on makefile, but only the yanger command is displayed, without more details:

make all
/home/noc/nso/5.7.1/bin/ncsc --ncs-compile-bundle yang                   \
    --ncs-device-dir ncsc-out                        \
                                  \
                            \
                                \
    -v --ncs-device-type netconf                        \
                                         \
    --ncs-ned-id cisco-iosxe-nc-1.2:cisco-iosxe-nc-1.2                                   \

Ignoring NCS-internal module "ietf-inet-types@2013-07-15.yang"
Ignoring NCS-internal module "ietf-yang-types@2013-07-15.yang"
yanger -p /home/noc/nso/5.7.1/src/ncs/builtin_yang:yang --ncs-builtin-yang-dir /home/noc/nso/5.7.1/src/ncs/builtin_yang --no-deviation-apply -t ncs -f yang yang/Cisco-IOS-XE-aaa.yang --ncs-device-type netconf  --ncs-mount-id cisco-iosxe-nc-1.2:cisco-iosxe-nc-1.2  -o augmented/Cisco-IOS-XE-aaa@2021-03-01.yang
internal error
make: *** [Makefile:51: ncsc-out/.done] Error 1

The following modules is present on yang directory:

ls yang/
cisco-ia@2020-03-01.yang                           Cisco-IOS-XE-ipv6-oper@2019-05-01.yang
Cisco-IOS-XE-aaa-oper.yang                         Cisco-IOS-XE-isis@2020-07-01.yang
Cisco-IOS-XE-aaa-rpc@2019-07-01.yang               Cisco-IOS-XE-l2vpn@2020-07-02.yang
Cisco-IOS-XE-aaa-types.yang                        Cisco-IOS-XE-license@2020-07-01.yang
Cisco-IOS-XE-aaa.yang                              Cisco-IOS-XE-line@2019-11-01.yang
Cisco-IOS-XE-acl@2020-07-01.yang                   Cisco-IOS-XE-logging@2020-07-01.yang
Cisco-IOS-XE-acl-oper@2020-03-01.yang              Cisco-IOS-XE-mpls@2020-07-01.yang
Cisco-IOS-XE-arp-rpc@2019-07-01.yang               Cisco-IOS-XE-multicast-rpc@2020-07-01.yang
Cisco-IOS-XE-atm@2020-07-01.yang                   Cisco-IOS-XE-native@2020-07-02.yang
Cisco-IOS-XE-bgp@2020-07-02.yang                   Cisco-IOS-XE-nd@2020-07-01.yang
Cisco-IOS-XE-bgp-common-oper@2019-05-01.yang       Cisco-IOS-XE-nd-deviation@.yang
Cisco-IOS-XE-bgp-oper@2019-11-01.yang              Cisco-IOS-XE-ntp@2020-07-01.yang
Cisco-IOS-XE-bgp-route-oper@2019-05-01.yang        Cisco-IOS-XE-ntp-oper@2019-05-01.yang
Cisco-IOS-XE-bgp-rpc@2019-07-01.yang               Cisco-IOS-XE-object-group@2020-07-01.yang
Cisco-IOS-XE-cdp@2020-07-01.yang                   Cisco-IOS-XE-ospf-rpc@2019-07-01.yang
Cisco-IOS-XE-cdp-deviation@2019-07-23.yang         Cisco-IOS-XE-ospfv3@2020-07-01.yang
Cisco-IOS-XE-crypto@2020-07-02.yang                Cisco-IOS-XE-parser@2019-07-01.yang
Cisco-IOS-XE-crypto-oper@2020-07-01.yang           Cisco-IOS-XE-platform-rpc@2020-07-01.yang
Cisco-IOS-XE-crypto-rpc@2020-03-01.yang            Cisco-IOS-XE-policy@2020-07-03.yang
Cisco-IOS-XE-device-hardware-oper@2020-07-01.yang  Cisco-IOS-XE-policy-deviation@2020-07-01.yang
Cisco-IOS-XE-dhcp-rpc@2019-07-01.yang              Cisco-IOS-XE-pppoe@2020-07-01.yang
Cisco-IOS-XE-dialer@2020-07-01.yang                Cisco-IOS-XE-route-map@2020-07-01.yang
Cisco-IOS-XE-dialer-deviation@2020-07-01.yang      Cisco-IOS-XE-rpc@2020-07-02.yang
Cisco-IOS-XE-ethernet@2020-07-02.yang              Cisco-IOS-XE-sanet@2020-07-01.yang
Cisco-IOS-XE-ethernet-cfm-efp@2020-07-01.yang      Cisco-IOS-XE-sanet-deviation@2020-07-01.yang
Cisco-IOS-XE-ethernet-oam@2019-11-01.yang          Cisco-IOS-XE-snmp@2020-07-02.yang
Cisco-IOS-XE-event-history-types@2019-05-01.yang   Cisco-IOS-XE-tunnel@2020-03-01.yang
Cisco-IOS-XE-features@2020-07-01.yang              Cisco-IOS-XE-tunnel-oper@2020-07-01.yang
Cisco-IOS-XE-interface-common@2020-07-01.yang      Cisco-IOS-XE-tunnel-types@2019-05-01.yang
Cisco-IOS-XE-interfaces@2020-07-02.yang            Cisco-IOS-XE-types@2019-11-01.yang
Cisco-IOS-XE-interfaces-oper@2020-07-01.yang       cisco-self-mgmt@2019-07-01.yang
Cisco-IOS-XE-ios-common-oper@2020-03-01.yang       cisco-semver@2019-03-20.yang
Cisco-IOS-XE-ip@2020-07-01.yang                    ietf-inet-types@2013-07-15.yang
Cisco-IOS-XE-ipv6@2020-07-01.yang                  ietf-yang-types@2013-07-15.yang

Only the AAA model end with this error.

 

Any hints concerning this issue ?

 

Regards.

1 Accepted Solution

Accepted Solutions

To be more specific, it's works too on NSO 5.7.4.

As mentionned on 5.7.4, a new yanger version is used, and solve yang compilations issues.

 

After opening a case on BST, they recommends to use as minimal version 5.7.4. I think NSO team will not backport changes on other versions.

View solution in original post

3 Replies 3

Nabsch
Beginner
Beginner

Hello,

 

I tried on NSO 5.7.2.1 . I got the same error but it compile on NSO 5.8.

 

 Can you try on NSO 5.8 ? 

 

One of the solution will be to use NSO 5.8 ..

 

 

 

Hi,

 

Indeed, it's works with 5.8. Maybe a yang compilation bug on 5.7.x ... I will open a case on BST and ask for a backport of code.

 

Regards.

To be more specific, it's works too on NSO 5.7.4.

As mentionned on 5.7.4, a new yanger version is used, and solve yang compilations issues.

 

After opening a case on BST, they recommends to use as minimal version 5.7.4. I think NSO team will not backport changes on other versions.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the NSO Developer community:

Recognize Your Peers