cisco C9200L-24P-4X poe is enabled.. but port is down

[jithinpnr]

In Cisco 9200L-24p can see that ports are connnected to PD (cameras)and power is allocated also..

port status is "not connected" and cameras aren't responding

[liviu.gheorghe]

Hello @jithinpnr ,

if commands like show interface x/y/z or show interface status show your port as not connected, then more than sure you have a cabling problem. Try with another patch cord.

Hope this helps.

[Leo Laohoo]

Post the complete output to the following command: 

sh power inline <PORT>