03-26-2020 10:55 AM
Running into an issue where I am getting alerts notifying me of a low current alarm on my Nexus 3ks for a tranceiver that is connected to an admin down interface. Is this an alarm bug?
Here is the alarm:
----------------------------------------------------------------------------
Current Alarms Warnings
Measurement High Low High Low
----------------------------------------------------------------------------
Current 0.00 mA -- 10.50 mA 2.50 mA 10.50 mA 2.50 mA
03-26-2020 11:16 AM
is this a cisco SFP in the port or non cisco SFP
can you post the output of
show interface ethernet x/x transc
shiw ver
03-26-2020 11:45 AM
Here is the output let me know if this is what you are looking for.
transceiver is present
type is 10Gbase-SR
name is CISCO-AVAGO
part number is SFBR-709SMZ-CS1
revision is G4.1
nominal bitrate is 10300 MBit/sec
Link length supported for 50/125um OM2 fiber is 82 m
Link length supported for 62.5/125um fiber is 26 m
Link length supported for 50/125um OM3 fiber is 300 m
cisco id is 3
cisco extended id number is 4
cisco part number is 10-2415-03
cisco product id is SFP-10G-SR
cisco vendor id is V03
03-26-2020 11:45 AM
04-01-2020 09:23 PM
Hello,
I think this bug is related to your problem, you should disregard these transceiver alarms.
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCve74342
Thanks,
Alvaro
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide