Re: 15454 AIP

bmyers · ‎08-15-2005

I am getting a MEA-AIP alarm on a 15454. I changed the AIP and still get the alarm. Has anyone experienced this before. Thanks.

mosho · ‎08-15-2005

You did not specify the type of chassis and Fan tray that you have.

It is possible that you are using an AIP card without a fuse with a chassis or fan tray that require 5amp fuse.

Change your AIP card to the AIP with fuse.

bmyers · ‎08-16-2005

I am using the AIP with a 5 amp fuse. Is it possible I need the one without a fuse? ow do I tell by the part numbers on the fan and chassis? thanks for the reply

mosho · ‎08-16-2005

It is possible that you have a bad AIP card. But first try and resit your active TCC card at a maintenance window. If this does not fix the issue, replace AIP if you have a spare otherwise call Cisco TAC if you have support contract and have the AIP RMAed.