04-04-2023 08:20 AM
Hello guys,
Where having issues with our network.
To be certain that the fiber isn't causing us any problems, we want to connect some of our switches with a DAC cable.
We want to connect a CB250 48T-4X with one CBS220 48P-4X and a CBS220 24P-4x.
My question is, which DAC cable can we use for this?
We have found that the "Cisco SFP+ Twinax copper cables" can be used for the 250, but is it also compatible with the 220 switches?
Thank you.
04-04-2023 09:04 AM
I found:
for the 250:
SFP-H10G-CU1M
SFP-H10G-CU3M
SFP-H10G-CU5M
For the 220:
SFP-H10G-CU1M
But 1m is just to short. I would need 3m.
Could I use the 3m for the 220?
04-04-2023 09:13 AM
- 220 is not mentioned in the compatibility list for SFP-H10G-CU3M : https://tmgmatrix.cisco.com/?tpid=89
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide