Re: SFP-10G-T-X compatible for catalyst 9200

adeebtaqui · ‎03-20-2022

Can we use SFP-10G-T-X on 10G network module of catalyst 9200

balaji.bandi · ‎03-20-2022

yes it supports, make sure you have the correct Module in place :

Network module part numbers and descriptions (C9200-NM-4G - this is only 1GB module)

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

adeebtaqui · ‎03-20-2022

The 9200 module is C9200-NM-4X.

The problem is sfp compatibity matrix does not show SFP-10G-T-X for C9200-NM-4X

Kasun Bandara · ‎03-20-2022

what is the exact module SKU?

if it is C9200-NM-4X official matrix not displaying under compatible list. check.

https://tmgmatrix.cisco.com/?npid=1766

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

marce1000 · ‎03-20-2022

- Not according too : https://tmgmatrix.cisco.com/?npf=341 and or verify compatible SFP-list.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

adeebtaqui · ‎03-20-2022

The 9200 module is C9200-NM-4X.

The problem is sfp compatibity matrix does not show SFP-10G-T-X for C9200-NM-4X

Has anyone tested as compatibity matrix may have missed to update

balaji.bandi · ‎03-20-2022

I have tested on Cat 9300 with that Module.(8X)

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

chris.gaffney · ‎05-24-2022

I have tested on C9200L-48P-4X-E (Cisco IOS XE Software, Version 17.03.03)
and it works fine. Not sure why it isn't listed. I believe it used to be listed.

In fact it shows up as a SFP-10GBase-CX1 when showing status

I use them at a remote site for 10G copper trunk to VM Host Virtual switch.

pindey · ‎07-17-2022

No, as on 18th July 2022

Leo Laohoo · ‎07-18-2022

@pindey wrote:

No, as on 18th July 2022

Can you offer more insight to this response?
Because @chris.gaffney got it to work.

Svetlana Atanasova · ‎11-05-2022

I tested it with IOS 17.03.04, 17.06.04, 17.09.02 on C9200L-48P-4X-E with original Cisco SFP-10G-T-X- not working with any of these. There are some C9200L models listed in compatibility matrix, but C9200L-48P-4X-E is not there. For the listed switches min compatible IOS version is 17.09.01 and I was hoping C9200L-48P-4X-E will also be working after IOS upgrade, but it's not. It's a great disappointment of 2960 series replacement.