cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3921
Views
5
Helpful
3
Replies

SFP GLC-SX-MM

JoshuaEvan
Level 1
Level 1

I got this number below the series of each GLC-SX-MM SFP's i had which is;
GLC-SX-MM / 30-1301-01

GLC-SX-MM / 30-1301-02

GLC-SX-MM / 30-1301-03

GLC-SX-MM / 30-1301-04

 

What the difference behind these numbers? anyone could help me? thanks

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame
The good question never saw so deep of the module, just looked at the module at my desk. now noticed some different one.
 

as per my understanding ;

 

Cisco 1000BaseSX SFP  850nm GLC-SX-MM Transceiver
30-1301-01 /02 /03 /04 - are part numbers

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Marvin Rhoads
Hall of Fame
Hall of Fame

Functionally there's no difference.

Cisco encodes various part numbers differently. Generally speaking, they have to do with the manufacturer identification and year/date the part was built.

Sometimes there may be minor revisions to the firmware (yes even SFPs have firmware) and that can be reflected in the part number.

Is there a Release Notes document for the 30-1301-0x parts?  I would like to see what was added/changed. 

 

I would also like to know what to expect if I mix the parts (ie a 01 on one end and a 02 on the other).  Granted, I would prefer to put the same model number on both ends ... but if I run short and that's not possible, what symptoms would I see to let me know that my issue is with mismatched parts?  Thanks! :)

Review Cisco Networking for a $25 gift card