09-16-2021 04:14 AM
BRIEF
DETAIL
N9K# sh int eth1/13 transceiver details
Ethernet1/13
transceiver is present
type is 1000base-LH
name is CISCO
part number is TRPUG1CLXECISE2G
revision is 01
serial number is OPM23170SHM
nominal bitrate is 1300 MBit/sec
Link length supported for 9/125um fiber is 10 km
cisco id is 3
cisco extended id number is 4
cisco part number is 10-2625-01
cisco product id is GLC-LH-SMD
cisco version id is V01
SFP Detail Diagnostics Information (internal calibration)
----------------------------------------------------------------------------
Current Alarms Warnings
Measurement High Low High Low
----------------------------------------------------------------------------
Temperature 38.06 C 89.00 C -9.00 C 85.00 C -5.00 C
Voltage 3.29 V 3.59 V 3.00 V 3.50 V 3.09 V
Current 21.63 mA 69.90 mA 4.50 mA 64.95 mA 5.50 mA
Tx Power -6.25 dBm 0.99 dBm -13.56 dBm -3.00 dBm -9.50 dBm
Rx Power -9.24 dBm 0.99 dBm -23.01 dBm -3.00 dBm -19.20 dBm
Transmit Fault Count = 0
----------------------------------------------------------------------------
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning
N9K#
N9K# sh int eth1/13 status
--------------------------------------------------------------------------------
Port Name Status Vlan Duplex Speed Type
--------------------------------------------------------------------------------
Eth1/13 To CTL notconnec 2001 auto auto 1000base-LH
N9K#
HISTORY
--sk
Stuart Kendrick
09-16-2021 04:22 AM
Couple of testing :
1. try adding command - speed nonegotiate
config t
interfface eth x/x
speed nonegotiate
shut and no sut bot the sides
2. Try to twitst Fible lead
A----A
B----B
to
A---B
B---A
09-17-2021 03:47 AM
I would agree with speed nonegoiate being a feature needed some times. Have seen this ALOT with ASR9k 1000nv Satellite pannel -> ASR920 with 1G LX SFPs! Have to add/ remove the command on the correct side to get it to work, some times it is opposite of what we did last time
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: