06-20-2003 05:20 PM - edited 03-13-2019 12:26 AM
Does anyone know if this is availible now. if so, what code of IOS and SRST? Can't find anything on CCO.
06-20-2003 08:09 PM
12.2(11)T
01-12-2004 08:45 AM
No, SRST doesn't work with MGCP, it should work with h323.
01-12-2004 08:51 AM
you can configure mgcp fallback to h323
01-12-2004 09:10 AM
I have MGCP sucessfully configured.on PRI
Version 12.3(4)T
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.X.X.X (ccmpub)
ccm-manager config
controller T1 1/0
framing esf
crc-threshold 320
clock source internal
linecode b8zs
pri-group timeslots 1-24 service mgcp
interface Serial1/0:23
no ip address
no logging event link-status
isdn switch-type primary-qsig
isdn incoming-voice voice
isdn bind-l3 ccm-manager
no cdp enable
call-manager-fallback
secondary-dialtone 9
max-conferences 8
transfer-system full-consult
timeouts ringing 30
ip source-address 10.X.X.X port 2000 (3725 IP)
max-ephones 35
max-dn 36
system message primary Cisco SRST-fallback mode
dialplan-pattern 1 15551212.... extension-length 4
transfer-pattern .T
keepalive 10
access-code pri 9 direct-inward-dial
voicemail XXXX
call-forward busy XXXX
call-forward noan XXXX timeout 12
moh music-on-hold.au
time-format 24
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide