05-20-2005 04:35 AM - edited 03-13-2019 09:10 AM
Hello,
I have connected a 7914 expansion module to 7960. All the buttons are red and the module status is showing as "not supported" on the phone.
Any ideas?
thanks,
marina
05-20-2005 04:48 AM
Under the 7960 programming did you add the expansion module?
05-20-2005 04:53 AM
I did
05-20-2005 05:14 AM
Odd, I have never seen that error message. Have you upgraded firmware on the 7960? Maybe the 7914 needs a firmware update to synch back up with the 7960 firmware? Is this a new installation or older?
05-20-2005 05:50 AM
Yes, its the latest one...Looks to me like AUX connection is broken or something like that
05-20-2005 06:17 AM
You need to upgrade the firmware on the 7914 while it is attached to a 7960 with an older firmware image and then upgrade the 7960.
"If you are using the Cisco IP Phone 7914 Expansion Module, you must upgrade the Expansion Module to firmware release S00104000100 before you install the 6.0(5) Cisco IP Phone 7960/7940 phone load. You can download the installation program, which is named cmterm-7914-sccp.4-0-1.exe, from Cisco.com at the same location as the installer for the 6.0(5) software. For more information about this firmware release, download the cmterm-7914-sccp.4-0-1-Readme.htm ."
That's an excerpt from:
05-20-2005 06:57 AM
Sounds like a good one to call TAC on. Sorry!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide