ATA 186 Web configuration

[gviera]

Hi,

I am configuring an ATA 186 with the web browser and there are 2 field that I don't know what should I set. They are "Use H323 ID:" and "Gateway IP".

I would be very gratefull If somebody could tell me what to set in those fileds.

Regards,,

[pax_2111]

you use H323 ID if you have a gatekeeper and want to register the ATA with the gatekeeper. This might be optional.

The gateway IP is the address of the media gateway (like Cisco 2600/36XX/53XX) that connects to the POTS. This is the address where you terminate calls.

hope it helped

[todeleon]

# GateWay: alphanumeric string (31 characters max) -- gateway ip (if

# gatekeeper is not used for routing call)

# IVR Access Code <11>

and

# GkId: alphanumeric string (31 characters max) -- gatekeeper zone id

# (default is '.').

# IVR Access Code <91>