Other Collaboration Subjects

After the setup of our MCS 7835 Unity server using the (Rapid Deploy) application we noticed that the drives were partitioned as follows C:4gigabytes and D:12,9 Gigabytes which left us with not enough drive space to install the Unity Software on the...

I need to change the Cisco CallManager Name. Not the server name, but the name of the CallManager in the CM Administration tool. CallManager Administration...System...CallManager...The name that was used during the installation of the system i...

I cannot seem to set up the BRI 2 S/T CARD in our 4224 IAD as gateways on the callmanager . only PRI's and T1 are catered for. ? Callmanager ver is 3.21can anybody help ?

Dear Sir/Madam: This is a rough description of our VOIP network, which I need to enhance the performance and security by controlling it from a single point of exposure. We have a VOIP network with gateway-to-gateway interacti...

have somebody can help me.because my MCS Windows2000 server be attack by virus.I want to use virus protection software.have somebody can give me suggest.thanks a lot.

Upgraded CCM to 3.2(2c) and all of our translation patterns are now locked to "Urgent Priority" and we cannot create translations without this option being locked. This creates problems with speed dials and DNIS digits that are translated b/c if the...

Ok I have a Unity Server(in its own domain) and callmanager at 1 site with a t1 connection to the main site where exchange 5.5 is located on a nt4 domain. HTere is no ip telephony at the main site. The customer wants to go to Unified Messaging. My qu...

If I want to put on the support patch F, the documentation says I requirewin-os-upgrade.2000-1-3spa. How do I find out what can an cannot be put on the ICS7750 SPE ???

Pri-Qsig VOFR or VOIPWhere can I find some real answers with regards to Pri-Qsig signaling and switching.Why does it fall apart I have tried everything can someone help.Sometimes it work perfectly, other times even during low traffic periods it just...

Unity 2.4.6.135Scenario: Call is forwarded to Unity. Unity forwards call to a specific Call Handler which transfer calls to an extension. Unity announces "please wait while I transfer your call". Is there anyway to setup a call route that will not...

In CCM 3.1.3, several phone DNs are "0xxx" and the reception DN is "0". Customer just wants dial 0 or 0# to reception.But when dial 0, get to reception after 12-13 seconds. when dial 0# will hear fastbusy tone.Based on Cisco document, CCM should sup...

Is there a tools allowing to extract Phone-list information from the Cisco Call-Manager DB?Thanks in advance,Marc.

I am integrating ip telephony with a mitel sx-2000 pbx. we have is a T-1 from a 6608 blade to the mitel box. Here is my problem. If I make a call from an ip phone to an outside line, the call goes through. If I then try to make a call from an ip phon...

I have a deployed Cisco Call Manager in place. Although there were some headaches at first it has really stabalized. Unfortunately my voice guys are trying to push the Avaya IP Telephony system. Allegedly the Avaya people are willing to replace ou...