Auto Answer on VG224

[chouna789]

Hello,

I have a voice paging system connected on one of port on VG224. paging vendor wants this port to be enabled with Auto answer option. I couldn't find any option on CUCM 9.1. is there is any option? Please help.

Thanks,

Narendra

[saif musa · Accepted solution]

Hi,

auto answer cant be done for analog voice ports, it can be done only to digital & packetized voice ports. Chick link below, it suggest to use cheap ip phone and connect it to paging system, I didn't use it but it seems interested. hope that would help.

https://supportforums.cisco.com/discussion/10346211/overhead-paging-cisco-voice-gateway

Regards

[chouna789]

Thank you Saif. yes this is indeed interesting now :) let me try for other option on the link.

[saif musa]

Please inform me about the results of trying another option, and don't forget to rate the post if it was helpful.

Greetings

[chouna789]

Sure Saif, will post the result soon. target location is in US and I work from India so waiting for user to confirm back if this plan worked. :)

[chouna789]

Hello Musa,

Your option indeed worked. :)

Thanks,

Narendra