12-07-2013 09:14 AM - edited 03-13-2019 08:27 PM
Hello,
I was curious if anyone could tell me how to block access to our CUCM servers for the purposes of testing SRST fall-back?
I am trying to apply an access-list to do this from a core 3750 stack.
Any help provided is greatly appreciated, thank you!
Solved! Go to Solution.
12-08-2013 06:49 PM
I use this method all the time, just go
deny ip
permit ip any any
of course you can leave the log statement out. but its good to use to check if your acl works.
apply this acl on your layer 3 interface on the gateway out of your phones' subnet
if you give me the subnets you use, we can work out the actual ACL
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================
12-08-2013 06:49 PM
I use this method all the time, just go
deny ip
permit ip any any
of course you can leave the log statement out. but its good to use to check if your acl works.
apply this acl on your layer 3 interface on the gateway out of your phones' subnet
if you give me the subnets you use, we can work out the actual ACL
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide