cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
483
Views
0
Helpful
3
Replies

C2821-25UC/K9

Rafael Jimenez
Level 4
Level 4

Im using the Dynamic Configuration Tool.

Im configuring aditional three vic2-4fxo to the c2821-25uc/k9.

I dont know why the application show me a warning when a select the PVDM2-32U48=.

But if I select the PVDM2-48= instead PVDM2-32U48 everithing is ok.

What is the difference to use PVDM2-32U48= or PVDM2-48= with C2821-25UC/K9 with three vic2-4fxo cards.

Thanks.

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Rafael,

I have never seen the part # PVDM2-32U48= but you will be fine with the PVDM2-48= on a 2821 :)

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd8016e845_ps3115_Products_Data_Sheet.html

Hope this helps!

Rob

PVDM2-32U48 is

PVDM2 32-channel to 48-channel FACTORY UPGRADE,

while the PVDM2-32U48 has a price list of USD 750, the price list for PVDM2-48= is USD 2400.

Hi Rafael,

I see :) In this case you would have to be puchasing a "bundled" package that included in it's price a PVDM2-32. For an extra $750 you could ask for the upgrade to a PVDM2-64. This sadly, cannot be ordered except in a "bundled" package :(

Here is an example;

Table 22 48-User Office - Single Site (Cisco 2821 Integrated Services Router)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bcs/testcase/reference/guide/whitebom.html

Hope this helps!

Rob