Call Failing and VPM on FXO is S_OPEN_PEND and 1 DSP FAILLING
I have in my GW 2911 a state in my FXO port S_OPEN_PEND and i read that this is caused for signaling problem and them I read that It could be cause because my PVDM aren't working good so I checked them and I realized one of them is failing and one of them is good.
So is there a way that my call use dsp 7 and not 1? or fail state in my dsp 1 has nothing to see with S_OPEN_PEND state in my FXO ports?
show voice dsp group all DSP groups on slot 0: dsp 1: State: FAIL, firmware: 38.1.2
Cisco Finesse Not Ready - Call Overlap status is very a very common issue seen on Finesse desktop. Agents miss two calls and they are put in Not Ready - Call Overlap status. This is very likely related to CVP server and it's unreachabl...
Lab 1: Cisco Meeting Server Standalone CertificatesLab 2: Cisco Meeting Server Cluster Certificates with Multi-SANLab 3: Multiple Certificates with Multiple CA ServersLab 4: Cisco Meeting Server Cluster Certificates Advanced ScenarioLab 5: Streamer Servic...
Certificates are the first step to deploy Cisco Meeting Server, preparing certificate are very important to enable different services. As a VOIP administrator, mastering the concept of certificates is unavoidable
Using multiple CA servers, instead of a si...
I just finished to write a comprehensive certificates preparation for Cisco Meeting Server Clustering. Through 60 pages I explained in detail, how to create certificates for database cluster, callbridge cluster, certificate chain for webbridge3, certifica...