01-08-2005 11:45 AM - edited 03-13-2019 07:34 AM
Hi,
I have an Cisco 2821 (IOS 12.3(8r)T7) router with following interfaces:
Module 0:
subslot 0:VWIC-2MFT-E1
subslot 1:vic2-2BRI-NT/TE
subslot 2:vic2-2BRI-NT/TE
subslot 3 vic2 -2 E/M
When i add this gateway (2821) to CCM 4.1(2) as MGCP gateway in subslot's box i don't have the choice of vic2-2BRI-NT/TE.
Does anyone know if this cards aren't supported?
Best Regards
MC
01-13-2005 07:18 AM
The voice compatibility document will help you in finding this information:
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml
01-14-2005 01:33 AM
Hi rrjoas45,
I think you didn't understand me.
I want to know why BRI interfaces in gateway 2821 using MGCP protocol didn't appear in CallManager GUI.
In 2821 CLI they appear and are working.
Regards.
MC
01-14-2005 07:12 AM
Hi,
the 28xx ISR Series supports only: T1 CAS, T1 PRI, E1 , FXS , FXO with MGCP.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_2/ccmsys/a08gw.htm
greetings
Mehmet
01-22-2005 04:15 AM
Can i configure 2821 as H323 gateway, in spite of call manager 4.1(2) system guide says that 2821 it only support MGCP?
BR.
MC
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide