cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
403
Views
0
Helpful
3
Replies

CCM Perfmon shows REM for a Gw

msmith
Level 1
Level 1

When we look at Perfmon on the CCM for H323 it will show our GW's. 2 of them that are functional and working show:

REM - nnn.nnn.58.15

REM - nnn.nnn.58.16

While the rest of the GW's show as IP add. without the "REM" in front.

Does anyone have a clue as to what is happening? thanks marc

3 Replies 3

ksilva
Level 1
Level 1

Are you looking at Perfmon from the Subscriber or the Publisher

Perfmon from Publisher showed 0 calls, on Subscriber the GW H323 Perfmon should that we did have a load/or calls, on the device named

REM- xxx.xxx.58.15. A control cntr restart of Services on Subscriber resulted in the REM going away and just the IP add. of the GW returning. Problem resolved but not solved. Thanks for the feedback folks. marc

electro22
Level 1
Level 1

Hi Marc -

I believe what that is telling you is that the GW with the REM infront of it is registered with your backup CallManager.

-Jaret