02-01-2004 11:58 AM - edited 03-13-2019 03:37 AM
Will Callmanager Express work with a Unity 2.4.6 voicemail?
If so... How would I set it up? Would I configure Unity to connect to the Callmanager Express (As if it was a full blown Callmanager)?
And How would I set up CCME to connect to Unity 2.4.6?
Thanks Again for your help.
02-01-2004 06:37 PM
This is a supported config. Check out the system configuration manual at
You will need pasword access.
Sarat
02-01-2004 08:49 PM
Config only show Unity 4.0
What about 2.4.6 or 3.0???
Thanks Again
02-02-2004 05:40 AM
CME isn't going to care, neither is Unity. You just have to configure Unity the same way as if it were connecting to a regular CallManager.
02-02-2004 06:37 AM
Thanks Alot, I will give it try.
02-05-2004 03:12 PM
I tried it, and it doesn't seem to work.
Unity 2.4.6 Registers then unregisters.
I do a show ephone and the unity ports show up as deceased.
Any ideas
02-05-2004 11:50 PM
Which version of TSP are you running on Unity?
02-06-2004 06:26 AM
I'm off site now... But its the one that came on the 2.4.6 CD.
How can I get the lastest? My CCO account does not have download capabilities.
Thanks.
Dan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide