CISCO ctftp errors in application log.

[ecclescf]

I am getting the following error event in the application log:-

Error: kCTFTPConnectSendFileNonTimeoutError - NonTimeout error

during call to recvfrom().

ErrorNumber: 10054

Block: 1

App ID: Cisco Tftp

Cluster ID: VS01RYNDE-AS46-Cluster

Node ID: 10.240.46.25

Explanation: NonTimeout error occurred during call to recvfrom().

Recommended Action: Ensure your system is connected to the

network. Check windows Taskmanager to make sure TFTP is getting

sufficient processor

time to serve files. Make sure you are following configuration guide

recommendations for your system configuration..

This error is occuring quite frequently and does not seem to be having any affect on the performance of the installation. This is on a publisher running 3.1(4b) Serv pack D in a cluster with 2 subscribers.

Any help/advice on this would be greatly appreciated.

Thanks

Chris

[kthorngr]

Hi,

Try restarting the Cisco TFTP service on the CallManager. I usually see these errors due to some sort of network related issue causing the TFTP server to resynchronize.

HTH

Kevin

[ecclescf]

Kevin,

Thanks for the reply, I did try this but it proved unsuccessful. However, I have since found that the problem seems related to a hardware conference bridge resource that is no longer registered to the pud due to a faulty switch port. I am waiting a swap out of the cat blade to confirm.

Cheers

Chris