Other Collaboration Subjects

We have a user that had an odd issue. They had a colon (:) that showed up next to their primary line appearance on their 7940 IP phone. I reset the phone from Call Manager and the colon disappeared. What caused this and what does that colon mean? ...

Will the ATA-186 accept a firmware level higher than v2.16? When I look at the sample config that comes with the v3.0 firmware the top of the page says ATA-188.I have tried to upgrade 2 ATA's from v2.16.1 and both have died in the process. The IVR ...

I know there's no such thing from Cisco, but is there a third party/open source Softphone that will work with CCM? TIASimon

Anyone knows if the IPCC software is purchasable alone?

Hello,I've CCM 3.3.(3) with an MGCP E1 PRI 1760 GW and I have a Route Pattern '0' to access the PSTN, which works in Overlap sending (I can have national PSTN numbers with 5-6-7-8-9 digits long). I also have a route pattern '2XXXXXXX' to call GSM pho...

helloin my case i have 2 ip phones in tunisia and the router which contain CME in in francei configured the router which contain CME as tftp serveri branch ip phones which i've configured (7940,7910)and i get tftp timeoutso i think to choose another ...

I have installed CRA and have some problems.I would like to see the installation logs on CRA server to check the installation.Anyone can help on this ????Thanks in advance.Anil

I am currently running Unity v. 3.1.5 against Callmanager v. 3.2.3. We are currently trying to design for a mixed usage G.711 / G.729 environment, whereas 711 will be used for local (LAN) traffic, 729 will be used (hopefully) on WAN traffic.Currently...

Hi,Would anybody have the MTBF of Cisco IP Phones? I'm especially looking for the MTBF of CP-7912G. Thanks in advance!

Hi,Our customer has experienced the error message when he tries to add a conference when there is no resource available:" Can not find the template resource" error. CCC version:1.2(2)CCM version:3.3(3)sr2Thanks

In callmanager 3.3(3), Is there a way to append 9 to the missed called and received calls list in the directory of the individual IP phones without pushing "edit dial" and then 9? We want to be able to just hit dial and make the call. Without appen...

I'm configuring intercom functionality with speed-dials and auto-answer. When the speed-dial is pressed, the called party only wants to be able to hear. He doesn't want the calling party to be able to hear him. Is there a way in CM 3.3(2) or any othe...

Hi All,I got a new cisco Wireless 7920 IP Phone, but I could not configure it:(1) Select Network config, Only got "Current Config", "MAC address" and "Site Survey" but no other options available.(2) Select Profiles, got "Not Available" message(3)Sele...