Hi,
We are using ASA5510 and configured the Expressway - E as DMZ. We have usual Static NAT and Security policy for internet to Expressway-E, Expressway - E to internet, Expressway-E to Expressway-C.
We are planning to replace the ASA5510 to a ISR 4331. i have configured DMZ zone on the ISR and connected the BE6K. The Expressway -C will in the trusted zone.
i am preparing for the migration. The issue i have is how to convert the Static source/Destination nat used in the ASA to match the ISR router configuration,
Did any one used the ISR similar to the setup i am planning to configure,
thanks in advance
Logesh
