Hi, Everyone! Cisco 2621XM - IOS Version 12.4(25d) Login failed [user: ] - Does not show "user" when connecting through telnet and trying with wrong "user and password" - Valid user works perfectly. When a failed login attempt is tried through telne...
Forum Posts
Hello all,I have a very strange issue with CUCM 8.6 License MAC. I deleted one of the NTP Servers in CUCM as that server is no longer active, and License MAC changed. As a result, my license becomes invalid. Have anybody experienced this before, and ...
Can i register Polycom and Grandstream iP phones on call manger express ?
We are preparing a new BE7000H server for our collaboration applications.We currently have vSwitch0 configured by default on the BE7000H and 4 network adapters are added under this (2 from the motherboard and 2 from the PCI card). Is it recommended t...
Resolved! CCME 11.7 can't call unregistred DN
I am converting a customer from an old ccme 7.1 on a 28xx to CCME 11.7/12 on ISR4331. I have found that I can't call DNs that are not registered even if they are forwarded to a valid destination(voicemail or another DN that is registered), in fact I...
Good morning to everybody,We are looking to design a solution for a custormer which already has an on-premise solution with UCS.At this moment they are planning to integrate a new solution with some rooms for videoconference, MX most likely.They will...
Hello Experts,Warm Greetings.Now we are planning to deploy Cisco Expressway for MRA. We have two BE6K servers in two different geographiclly distributed datacenters (in the same country). Currently we delployed CUCM with Clustering Over WAN. Becasue ...
Hi Everyone,I did deploy Cisco meeting server app. I just noticeed that I have only a few layout on meeting windows but I can see many of layout type equel nineth, one plus n, one plus seven, one plus five ant stack, overlay etc. Can you please expl...
Can i connect CUCM BE6000 to third party call manger VIA SIP protocol ?
Hi, is it possible to use the CLI of CUE modul to download a Voicemailbox Greeting wav file? A running system needs to be replaced by a new one and we want to continue use the existing voicemail greetings. Regards René
Hi guys, I have this licenses for CUCM10.5 and CUC : SKUTotal LicensesQuantity FulfilledSmart License Converted Available QuantityBE6K-PAK11----UCXN-10X-SCPORTS22----UCM-10X-ENH-UCL2525----UCM-10X-ESS-UCL11----UCN-10X-VM-UCL2525----BE6K-UXL-START11-...
Resolved! Cisco Hyper-v vision
Hi Guys, Does anyone knows if Cisco IPT moving to Hyper-v in near future? Becauase there's some rumors that Cisco thinking to move to Hyper-v plateform soon? RegardsAdnan
if i have Polycom and Grandstream IP phones and both phones support SIP protocol can i regesiter these phones on the BE6000 ?
HiWe have configured SIP Trunk recently and have problem while creating inbound call from PSTN. We have used the command "debug voip dialpeer detail " inorder to make sure that our dial-peers function fine. I think my configurations from vgw-CUCM is...
Hi, We are using ASA5510 and configured the Expressway - E as DMZ. We have usual Static NAT and Security policy for internet to Expressway-E, Expressway - E to internet, Expressway-E to Expressway-C. We are planning to replace the ASA5510 to a ISR 43...
