cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
280
Views
0
Helpful
2
Replies

Clock Glitches on WS-6608 Port

I need to get an explaination for Clock Glitches on a D-Channel of a WS-6608 port.

2 Replies 2

mimckee
Level 1
Level 1

Not sure exactly what you mean. Are you seeing slips on the t1 at layer one? Is that what you are wanting an explanation for or is that something I am missing. If you do the 6608 back to back and setup one side as internal and one side to network are you still seeing the same issue. This can rule out the 6608.

Thank you,

-Mckee

If you open the web interface to the port and click on the D-Channel you will see an entry for Clock Glitches. This is what I need an explaination for. I solved the problem I was having be using another port on the blade, I just need to know what this entry is telling me.