02-07-2005 06:43 PM - edited 03-13-2019 07:56 AM
I have a customer running CME 3.2 with three FXO ports plared to the receptionist. Some calls show in the phone's call history as "From 911". Since we also have dial peers for outbound access, including to 911, I'm thinking this is coming off one of the dial peers. Can I force inbound caller id to be something such as "From Outside Caller"? Caller ID is not available from Telco. Selected bits of config below.
voice-port 1/0/0
input gain -3
no comfort-noise
connection plar 688
caller-id enable
!
voice-port 1/0/1
input gain -3
no comfort-noise
connection plar 688
caller-id enable
!
voice-port 1/0/2
input gain -3
no comfort-noise
connection plar 688
caller-id enable
!
voice-port 1/0/3
input gain -3
no comfort-noise
connection plar 688
caller-id enable
dial-peer voice 911 pots
description Emergency Services Access
preference 1
max-conn 1
destination-pattern 911
port 1/0/0
forward-digits all
!
dial-peer voice 912 pots
description Emergency Services Access
preference 2
max-conn 1
destination-pattern 911
port 1/0/1
forward-digits all
!
dial-peer voice 913 pots
description Emergency Services Access
preference 3
max-conn 1
destination-pattern 911
port 1/0/2
forward-digits all
!
dial-peer voice 914 pots
description Emergency Services Access
preference 4
max-conn 1
destination-pattern 911
port 1/0/3
forward-digits all
!
dial-peer voice 98 pots
description Local Dialing
preference 1
max-conn 1
destination-pattern 9[2-9]......
fax rate disable
port 1/0/0
!
dial-peer voice 99 pots
description Local Dialing
preference 2
max-conn 1
destination-pattern 9[2-9]......
port 1/0/1
!
dial-peer voice 100 pots
description Local Dialing
preference 3
max-conn 1
destination-pattern 9[2-9]......
!
dial-peer voice 101 pots
description Local Dialing
preference 4
max-conn 1
destination-pattern 9[2-9]......
port 1/0/3
!
dial-peer voice 94 pots
description Long Distance Dialing
preference 1
max-conn 1
destination-pattern 91[2-9].........
fax rate disable
port 1/0/0
forward-digits 11
!
dial-peer voice 95 pots
description Long Distance Dialing
preference 2
max-conn 1
destination-pattern 91[2-9].........
fax rate disable
port 1/0/1
forward-digits 11
!
dial-peer voice 96 pots
description Long Distance Dialing
preference 3
max-conn 1
destination-pattern 91[2-9].........
fax rate disable
port 1/0/2
forward-digits 11
!
dial-peer voice 97 pots
description Long Distance Dialing
preference 4
max-conn 1
destination-pattern 91[2-9].........
fax rate disable
port 1/0/3
forward-digits 11
!
dial-peer voice 811 pots
description International Dialing
preference 1
max-conn 1
destination-pattern 9011T
port 1/0/0
prefix 011
!
dial-peer voice 812 pots
description International Dialing
preference 2
max-conn 1
destination-pattern 9011T
port 1/0/1
prefix 011
!
dial-peer voice 813 pots
description International Dialing
preference 3
max-conn 1
destination-pattern 9011T
port 1/0/2
prefix 011
!
dial-peer voice 814 pots
description International Dialing
preference 4
max-conn 1
destination-pattern 9011T
port 1/0/3
prefix 011
02-07-2005 07:02 PM
Hello ,
Try this .Make a call from outside and try to replicate the problem.When you are successful in replicating the problem see which dial-peer it matches.Under that dial-peer you can try two things.
dial-peer voice <> pots
clid strip-- to remove the caller id totally or
clid network-number
I hope this helps.
Thanks,
Radhika
02-08-2005 06:18 AM
I'll give the clid strip a try, thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide