10-02-2006 06:13 AM - edited 03-13-2019 03:11 PM
Hi,
I'm working with a 2821 and I just have udated the IOS. Now the curent version is 12.4.(10) with CME 3.3.
I have downloaded the latest version of CME 4.0.3, put it on the flash memory of my routeur, and extract it.
My problem is that : when I do a sh telephony-service all I style can see CME version 3.3 !!!
Have I miss something ?
Lot of thanks !!!
10-02-2006 06:18 AM
The CME downloads section show 4.03 as supported only by 12.4.4XC4.
10-02-2006 07:14 AM
Hi
CME is basically written into the IOS version you install - the IOS you have is a CME3.3 version even if you put the CME4.0 files on it.
When you download CME 4.0 (which is basically just phone firmware loads and a few other odds 'n' ends) it will have an IOS version listed with it.. you need to download that version of IOS as well and install it.
Regards
Aaron
Please rate helpful posts...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide