cnf-files in CME

[ciscoforum]

There is this command create cnf-files on the CME. I guess this is to generate a configuration file for phones and phone can download this file when phone boots up.If that's the case I should be able to see the cnf file in the flash, but I didn't see it. Thanks

[Aaron Harrison]

Good evening...

I think the files you're looking for are in a subdirectory of the flash - I seem to remember the folder being called 'ITS'...

Regards

Aaron

[Aaron Harrison]

Tell a lie - the files are actually in system:/its

so:

dir system:/its

Regards

Aaron

[ciscoforum]

Hi Aaron

This is what I saw under the system:/its. So these are files created individuly for different type devices according to the create cnf file. Right? thanks very much.

R3745#dir system:its

Directory of system:/its/

16 -rw- 313 ATADefault.cnf.xml

18 drwx 0 austria

20 drwx 0 canada

22 drwx 0 denmark

29 drwx 0 france

36 drwx 0 germany

43 drwx 0 italy

50 drwx 0 netherlands

57 drwx 0 norway

64 drwx 0 portugal

71 drwx 0 russia

17 -rw- 57 SEPDEFAULT.cnf

79 drwx 0 spain

86 drwx 0 sweden

93 drwx 0 switzerland

95 drwx 0 united_kingdom

97 drwx 0 united_states

13 -rw- 889 XMLDefault-1.cnf.xml

14 -rw- 962 XMLDefault-2.cnf.xml

12 -rw- 1065 XMLDefault.cnf.xml

6 -rw- 313 XMLDefault7902.cnf.xml

4 -rw- 757 XMLDefault7905.cnf.xml

3 -rw- 444 XMLDefault7910.cnf.xml

5 -rw- 757 XMLDefault7912.cnf.xml

10 -rw- 561 XMLDefault7920.cnf.xml

15 -rw- 405 XMLDefault7935.cnf.xml

7 -rw- 405 XMLDefault7936.cnf.xml

11 -rw- 785 XMLDefault7960.cnf.xml

9 -rw- 313 XMLDefault7965.cnf.xml

8 -rw- 405 XMLDefault7970.cnf.xml

[Aaron Harrison · Accepted solution]

Yep - when you run certain commands (like set the load 7960-7940 or whatever) it updates these files...

You can see what files the phones download by doing a debug tftp events, gives you a good idea what's going on...