09-03-2010 04:07 PM - edited 03-13-2019 07:07 PM
How Can I delete all files stored on SD memory on DMP.
There any command to do so from the DMM, I need to delete the contents to 300 DMPs.
Thank you in advance.
Regards
Solved! Go to Solution.
09-09-2010 10:06 AM
I filed an enhancement request for this feature:
CSCti83985 - DMP: Need a way to erase Flash (USB1 or USB2) from DMM or MIB
Hopefully, this feature will get added in a future release
Please take time to mark this
discussion answered & rate the response.
Thank You!
T.
09-08-2010 08:44 PM
Aurello,
You can delete the files manually via ftp.
Simply FTP to the DMP and delete the files in USB1 & USB2.
Of course this may not scale for 300 DMPs. I am unaware of any
MIBs or advanced tasks that could erase the contents on the
flash of the DMP.
I have had discussions internally and no one has come up
with a simple solution. You may be able to write some
script that could FTP to a list of DMPs and perform a task
to erase the flash using FTP.
I will file an enhancement\feature request and we will see if it
gets added in a future release...
Cheers!
T.
09-09-2010 08:16 AM
I am aware, thank you very much for your help.
Regards
09-09-2010 10:06 AM
I filed an enhancement request for this feature:
CSCti83985 - DMP: Need a way to erase Flash (USB1 or USB2) from DMM or MIB
Hopefully, this feature will get added in a future release
Please take time to mark this
discussion answered & rate the response.
Thank You!
T.
09-09-2010 01:17 PM
Aurello,
Quick turn around ;-)
This is how you can accomplish the deletion of all content
on USB1 & USB2.
Two methods: (Browser MIB or Advanced Task that you create)
Browser MIBs
-------------
https://admin:default@a.b.c.d:7777/set_param?mng.command=write+sh+FG+rm+-rf+/tmp/ftproot/usb_1/
https://admin:default@a.b.c.d:7777/set_param?mng.command=write+sh+FG+rm+-rf+/tmp/ftproot/usb_2/
admin = DMP Web Account Username
default = DMP Web Account Password
a.b.c.d = IP Address of DMP
Advanced Tasks--> System Tasks
------------------------------
Name\Description = Clean USB1 on DMP
Request Type = Set
Request = mng.command=write+sh+FG+rm+-rf+/tmp/ftproot/usb_1/
Name\Description = Clean USB2 on DMP
Request Type = Set
Request = mng.command=write+sh+FG+rm+-rf+/tmp/ftproot/usb_2/
I hope this works for you!
T.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide