Dial peer howto

[godzilla0]

Hi I need to know how to do the following. Incoming call with number 935205502 must go back out inmediately with number 600461448.

Thank you !

[paolo bevilacqua]

Do you have CM or CME? If so the easier thing thing is to set CFA on a DN.

[godzilla0]

I'm sorry but I can't understand none of your short words here. Thanks.

[paolo bevilacqua]

Communication Manager, Communications Manager Express. Do you have any of that or what do you have ?

[godzilla0]

No, I'm using dial peers on the IOS straight.

[paolo bevilacqua]

voice translation-profile makechange

translate called 100

voice translation-rule 100

rule 1 /12345678/ /87654321/

voice-port x/y

translation-profile incoming makechange

DP config as normal.

[godzilla0]

that helped me a bit more. What you mean with DP ? Thanks.

[paolo bevilacqua]

Dial Peer.

[godzilla0]

Should I configure a dialpeer after that configuration to make it work ? Or that's just another kind of dialpeer ?

[paolo bevilacqua]

You should have already dial peer configured if the router was working someway.

[godzilla0]

Hi, I'm calling after doing what you said but it's not working, something to say ?

[paolo bevilacqua]

"debug isdn q931" and if necessary "debug voip dialpeer". "term mon" as always when taking debugs.

[yxsjwsb]

Anytime I'm troubleshooting PRI's, I'll use a program from download.com, the PRI debugger. just go there and search for e1 or t1. Very useful to have one place (that's not scrolling) to see the call info on a PRI

[godzilla0]

Nice to know, will check it out, thank you !

[godzilla0]

Hello ! I have found that the number translation works, but it seems that the outgoing number does not match with any of my outgoing dialpeers. Can somebody explain what happens ? I'm posting a text with the error dump.

Thanks !