Dial Peer with 2 SIP end points

[believ1]

Hello all.

When configuring dial peers for using H323 GW's to 2 CallManagers, you can send incoming calls to the 2 CM's using preference and h225 timeout tcp establish in the H323 voice class. I want to do this also with 2 SIP PBX's. I want to create 2 dial peers with the same dest pattern to point to 2 different PBX's, using SIP. Is preference enough? Do I need to configure some timeout mechanism like with H323?

Thanks

[agopala]

No, There is no eq to H224 timeout in SIP. You just do pref and that should take care of it. One thing you can do if you want to load balance is to use a DNS server to load balance and session target dns:blah.