Re: Difference applying translation profile on voice port and dial peer
The voice port will be looked at first (inbound) or last (outbound) depending on the call flow. If your call flow is fairly simple you may have a situation where the telco is sending everything 4 digits but you need everything to be 10 digits or even +E164. In this case you could put a profile on the voice port changing everything from 4 digits to +E164. You could also do the same thing on the dial-peer. In my experience if your setup is fairly simple, just do it on the voice port. You will overcomplicate things on the dial-peer.
This document is intended to receive any new ideas for TAC to create new useful walkthrough videos to help set up deployments, integrations, etc.
Feel free to share any feedback about new walkthrough videos you consider useful, please share your o...
Configuring Cloud Connected PSTN (CCP) – Easy as 1-2-3!
STEP 1: PREPARE
Before you can configure your CCP in Control Hub, you must procure PSTN services from an authorized Webex Calling CCP Partn...
To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about how to read Cisco Unified Communications trace files. In this session, Cisco D...