10-25-2017 05:54 AM - edited 03-13-2019 10:03 PM
I have an issue at a client where an analog door phone is connected to an FXS port controlled by CUCM through stcapp.
Whenever the doorphone's button is pushed, it sends a call to 545 which is not the extension of the person at reception anymore (but used to be). Sadly, noone remembers how to program the digits the doorphone sends to the new reception's number, so I'm stuck with finding a way to manipulate the digits the FXS port sends to CUCM.
I have tried using a translation-profile outgoing on the voice-port, as well as on the dial-peer, num-exp 545 658 in global config but nothing seems to work.
Is it possible to change these numbers on the gateway ? I can't use a translation pattern in CUCM since 545 is still in use as a phone extension.
Solved! Go to Solution.
10-25-2017 12:42 PM
You could create a new CSS that is only assigned to the FXS port and give it access to a new partition containing your translation pattern.
10-25-2017 12:42 PM
You could create a new CSS that is only assigned to the FXS port and give it access to a new partition containing your translation pattern.
10-27-2017 06:09 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide