cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
634
Views
0
Helpful
1
Replies

Disaster Recovery / Backup Issues with CUCM, UCCX, and CUXN

James Carlson
Beginner
Beginner

Hello! For years, I've had a Windows 7 box setup running freeSSHd v1.3.1 on one of our Cisco voice hosts to handle the backup jobs for CUCM v10.5, UCCX v10.6, and CUXN v10.5. The only thing this Windows 7 box does is handle the backups for those 3 systems. Other than that, there is no overhead on this box at all. 

 

However, after a recent shutdown / reboot of the hosts to update the ESXi from v5.5 to v6.5, backups have been spotty at best. There is plenty of space for the backup files on the Windows 7 box and the pre-check for staging / disk space always passes, but the jobs continuously fail with this error most frequently: 

 

 

Result Code : 116-SFTP transfer failed during Backup. Either there is not enough disk space or network transfer failed due to interuption while transferring data to configured SFTP Server
Result String : ERROR

 

 

2019/04/15 01:07: Tar/sftp operation failed.
2019/04/15 01:07: BACKUP OPERATION HAS FAILED

 

 

error writing output file
tar: -: Wrote only 2048 of 10240 bytes
tar: Error is not recoverable: exiting now

 

 

I've tried rebooting the Windows 7 box, changing the backup schedule times, re-associating the backup devices inside of the Disaster Recovery System, moving the Windows 7 box to the same virtual host as the CUCM, UCCX, and CUXN servers all to no avail. 

 

Any input / recommendations is greatly appreciated.