07-21-2003 11:30 AM - edited 03-13-2019 12:49 AM
Can someone help me and tell me how I should setup my DL380 with 4 drives for CCM3.3 2. Should they be mirrored meaning 2 drives for the OS and 2 drives for the application? I just started this installation and researched everything except this. A quick response is needed. Thanks again.
07-21-2003 12:17 PM
Hi
There is not really 1 out there for CCM but have a look at the one for Unity. It gives some good practices on raid configs that can be applied to ccm as well.
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_technical_reference09186a00800a5b6c.html
Kind Regards
Ullie
07-21-2003 12:25 PM
In my opinion it should always be mirrored.
That way you can pop a couple of drives before upgrades and roll back very quickly if you get a dodgy patch.
I can't tell you the number of times I have been glad I can roll back quickly. I even have spare disks which I rotate every 4 weeks to ensure I always have a good copy to boot.
John
07-21-2003 12:50 PM
Thanks again. I setup the drives to be mirrored. I thought that was the practice but I wanted to make sure before I started. I appreciate the help.
07-21-2003 01:30 PM
Actually, you dont have a choice.
The OS install CD will re-configure the RAID into a mirror. If this is a 7835, and you have 4 drives you will likely have problems getting the right drives mirrored, because this is unsupported by the OS install.
The only model that supports 4 drives is the 7845.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide