04-17-2012 10:10 AM - edited 03-13-2019 07:48 PM
Hi everyone:
I have 4 DMPs and I want to assign a static ip address.
Regards
Solved! Go to Solution.
04-17-2012 04:52 PM
Hello Aurelio,
Not sure what code you are running on the DMP but the Symptoms seem similar to the DDTS#
CSCti98801
Symptom: The following error message is displayed : "Network Error. Please check your connections" Conditions: Assigning static IP address to the DMP(firmware 5.2.1) without using the "DOMAIN NAME" Workaround: Populate the Domain name field with the correct domain name.
Thanks,
Sagar Dhanrale
04-17-2012 04:52 PM
Hello Aurelio,
Not sure what code you are running on the DMP but the Symptoms seem similar to the DDTS#
CSCti98801
Symptom: The following error message is displayed : "Network Error. Please check your connections" Conditions: Assigning static IP address to the DMP(firmware 5.2.1) without using the "DOMAIN NAME" Workaround: Populate the Domain name field with the correct domain name.
Thanks,
Sagar Dhanrale
04-20-2012 03:38 PM
It's correct Sagar Dhanrale.
I agregate domain name in Basic DMP Configuration and can change to static address.
If you don't include a Domain Name in your DMP configuration, you will see the following message. My DMP is a 4400G and 5.2 version.
Thank you Sagar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide