Other Collaboration Subjects

Hello,I created a service that start on idle url.Example of the URLhttp://callmanager/service.php?a=11&b=22&c=33The problem is: in the 7941 phone model works, but in the 8941 phone model doesn't works.In the 8941 model the XML service can get only th...

ICD is V3.0.2 with CCM 3.2.2c.In the webpage: //icd-server/appadmin, after key in the User Identification name and password, the page is hanging there, just display “Opening page http://172.16.7.6/CRALogin/j_security_check… ” in the bottom line. I c...

  Hi.Im trying to instal the dms-vm from the ciscoet page,  the vm.5.2.3.427 is ok,but in the case of the 404.exe the install is ok but in the moment that i want to load this machine a error message appear. if the file is corrupt,where i can find the...

Hi,Im using a lab setup connecting DMPs through a WAN connection.I can PING the DMP IP Address but the DMP is not registering with DMM.Sometimes it comes up and again it comes down.I have attached a screen shot of my DMM applience

Hi , I am looking for installation documentation for thwe MXE 3500, I have found several docs that run through unpacking and BIOS config, but nothing around the initial IP configuration to allow access over ethernet. Any info greatfully receivedScott

Would like to work locally in a VM for much faster Flash API/dev purposes, is there any way to get an image of a 4310 install (the Linux/busybox image)?Alternatively - is there a documented method for cross-compiling in the MIPS architecture required...

my customer is migrating from meetingplace 8.0 to meetingplace 8.5. I am at the stage where i have configured my SSH server (on a windows box) to migrate the data however i am getting Validation Migration Failed. is there any valid documentation or w...

Hello,I would like to run a Cisco Call Manager express using 150 phones connected to it. Based on those requirements, I have figured out, it needs to be at least a Cisco 2951 , since it supports up to 150 ephones, And I aslo need 5 E1 cards.I would l...

CM3.2(2a), 3660 w/ 12.2(2)XT3 w/ FXO port to Bogen ZPM3. H323 configuration something like:dial-peer voice 20 potsdestination-pattern 200port 2/0/0voice-port 2/0/0timing hookflash-out 50IP phone dials 200, FXO port status flashes green briefly then d...

Hi all,Im stuck with this problem. Some User are having problems with the AC. Login is fine, the "Dial" Button is not activated until clicking somewhere on the boxes (call control,broadcast cal..etc) (is that normal?). When Dial Button became activat...

Hi,I'm trying to find out how to organize TMS phone book based on locations. For reference, if there 5 cities and 4 endpoints in each city, instead of having all together in the same list, I would like to separate them in 5 groups.Is that possible?BT...