11-24-2010 03:33 AM - edited 03-15-2019 05:13 AM
cisco gateway 3845 have 2 ports E1 Connectivity.
looking at the E1 noticed lots of line code violations and one of the E1 keeps dropping. another port E1 4/0 up and running .
clock source line primary
#sh controllers e1 4/1
E1 4/1 is down.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20030723, FPGA: 255, spm_count = 0
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line Primary.
Current port master clock:recovered from controller 4/0
Data in current interval (57 seconds elapsed):
306159 Line Code Violations, 0 Path Code Violations
6 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 57 Unavail Secs
Data in Interval 1:
1545575 Line Code Violations, 148 Path Code Violations
39 Slip Secs, 0 Fr Loss Secs, 420 Line Err Secs, 6 Degraded Mins
409 Errored Secs, 0 Bursty Err Secs, 1 Severely Err Secs, 489 Unavail Secs
Thanks in advances
11-24-2010 06:57 AM
Syed,
My apologies. To make sure that your question
is addressed in a timely manner, you may want to post
your questions in the appropriate forum space.
This is community forum is for Digital Media. Your
questions should be posted in the "IP TELEPHONY" forum.
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/ip-telephony
Thanks
T.
11-29-2010 03:01 AM
Can please remove the from the Digital media System .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide