cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
560
Views
0
Helpful
1
Replies

Error: DeviceTransientConnection - Transient connection attempt.

neal.miller
Level 1
Level 1

Keep getting these errors in the event log of the call manager. All are usually the same. What exactly are these???

Error: DeviceTransientConnection - Transient connection attempt.

Connecting Port: 2000

Device name [Optional].: SEP00e07524998f

Device IP address.: 10.40.107.143

Device type. [Optional]: 30019

Reason Code [Optional].: 1

App ID: Cisco CallManager

Cluster ID: MC-CCM1-Cluster

Node ID: 10.37.70.5

Explanation: A connection was established and immediately dropped before completing registration. Incomplete registration may indicate a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection.

Recommended Action: No action is required if this event was issued as a result of a normal device rehome.

1 Reply 1

green-robert
Level 1
Level 1

you have a phone out there in your network 10.40.107.xxx that has no config in CCM. Im guessing Auto registration is turned off.