03-13-2002 03:39 AM - edited 03-12-2019 02:48 PM
I can't find how to set Calling Line Identification Restriction (CLIR) on PRI line. Is any body have idea how to set it up on AS5300?
Thanking in advance,
Vladimir
03-13-2002 01:50 PM
If you do a debug isdn q931 on the as5300 and place an inbound call to the callmanager do you see a calling party in the isdn setup? Also what version of IOS are you running on the as5300?
Thank you,
-Mckee
03-14-2002 01:39 AM
Fistly thanks for reply.
IOS version is 12.2.(6) c5300-is-mz.122-6.bin
I'd like to explain exactly what happens so
When I place a call to PSTN always on destination station (mobile or isdn phone) I can see either default ID of PRI or ID which belongs the range of allocated ID for this PRI. Even I can see that 'deb isdn q93' sending 0000 as Calling ID on the destination unit default ID shows. The engineers from our telecom indeed that is no restrictions from their side and that is just a enabling CLIR matter. I can't find what is the CLIR actually doing on ISDN level. Could you help with detailed description? By the way this problem I having in Cyprus and most probably we using euro-ISDN standard.
03-13-2002 02:01 PM
CLIR is set by the originator of the call and passed by the 5300. The 5300 as a gateway will just pass it.
03-14-2002 01:52 AM
My question about other case when c5300 initiate the POT leg. Even I send fake or empty calling ID I still can't hide default PRI ID. I looking for the instrustion how to hide my PRI line number while I calling to mobile or other ISDN end points.
03-14-2002 02:36 AM
Hi, maybe you have to ask the PSTN provider to do it for you.
03-14-2002 03:02 AM
Unfortunately they don't have a clue how to configure Cisco Voice Gateway for CLIR functionality, as well they don't know a theory how it should work. But they can show how to configure PBX for CLIR !!! :(
03-13-2002 02:04 PM
you can however use a translation rule and translate-outgoing calling on outbound pots dial peer to translate cpnum to null if you don't want to send it
03-14-2002 03:25 AM
Honestly I fill that it is clue to a puzzle!
'NULL' does not appeir as an option in CLI but it was accepted as number. So I did that:
Calling Party Number i = 0x80, 'null', Plan:Unknown, Type:Unknown
Called Party Number i = 0x81, '867137', Plan:ISDN, Type:Unknown
But still on destination station (867137) default PRI ID appeirs. Is CLIR means 'null' in cpnum field?
03-15-2002 02:06 AM
Please give me more ideas.
Thanking in advance,
Vladimir
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide