I am setting CME and CUE for a small office and I have 99.9% working as needed. They want all phones including the cordless phone connected to the FXS port to ring when a call comes in. I have this working by configuring a parallel hunt group.
The hunt group pilot is 110 and the main number is translated to 100 and 100 is the number for ephone-dn 1. ePhone-dn 1 is configured on all phones on line 2. All works as needed.
The problem is that when no one answers, the call is sent to voicemail using the hunt group number of 110. Voicemail works but since 110 is not on any phone line button, no one knows that there is a message waiting.
I need the calls going from the hunt group 110 to have the callerID of 100 instead. I tried to set the ephone-dn 1 to number 100 but I get the error: Dn assigned to a ephone/voice hunt group. Number cannot be changed.
In English, I need to have the calls from the hunt group (110) go to voicemail as 100.
