Hi, One of our location is displaying the incorrect callerid for outbound calls, we want all calls from this location to display a specific callerid. From reading the voice translation rules document I believe the below configuration will work but h...
Forum Posts
Hi Everyone,I recently implemented TOD for out of the hours schedule and it seems that the partition is skipped and TOD routing doesn't take place. In the same Inbound CSS applied for a SBC trunk, I have another partition that has TOD working, but wh...
Resolved! Call PickUp Groups and Hunt Groups
Is it possible that a set of telephones, belonging to the same Call PickUp Group and to the same Hunt Group, can pickup calls destined to their Hunt Group?I have CallManager 4.0(2) and when I try, from a phone, to pickup a call that was destined to t...
With the Cisco 880 ISR routers going end of life...what is the equivalent replacement with voice capabilities?
Is there an easier way to answer a call using Cisco Jabber other than clicking your mouse in the answer box? I would love to just push a keyboard button rather than mouse or using the physical phone.
Resolved! Can't Join the Meeting with URL API "m.php?AT=JM". The Error is "InvalidMeetingKeyOrPassword".
QuestionWe have meet the trouble that we can't join the meeting(with password protection) by URL API m.php?AT=JM".The error detail infomation is following :MYURL?AT=JM&ST=FAIL&RS=InvalidMeetingKeyOrPassword&MK=MEETING_KEYWe created the meeting with x...
Can Transcoders be added Directly to Endpoints? Or, is it Mandatory to use MRG MRGL ? Can a transcoder be directly assigned to an edpoint without using MRG/MRGL?
Hello. We are having trouble when a call is transfered, the transfer is successful but, in the waiting time during the transfer it doesn't sound any tone or music, just silence, until the other person picks up the phone. What could be the cause of it...
We recently upgraded to CUCM 10.5 and CUC 10.5 using an e.164 dial plan throughout. One snafu that has surfaced is how do people access a CallHandler via the Greetings Administrator TUI if the CallHandler extension begins with a '+' character? Pressi...
Dear Expert,Kindly, i want to know if i can extract or know the serial number for the installed LIC-CUCM from the Cisco prime license manager or from Cisco Unified CM Administration ???My problem is that i want to order smartnet for my installed lice...
I have a Cisco 8861 on Ring Central. When I set the Admin password it works I get the lock icon but gets reset on RC when it re-syncs. Also any quick dials disappear.
Resolved! Voice Interface Cards (VICs)
I want to practice the configuration of T1/E1 cards in packet tracer but could not find in it. is packet tracer support VICs ?
I am setting CME and CUE for a small office and I have 99.9% working as needed. They want all phones including the cordless phone connected to the FXS port to ring when a call comes in. I have this working by configuring a parallel hunt group.The hu...
This issue was brought to our attention because the Supervisors logging into Supervisor Desktop are unable to see their agents in the team list.The Agent Desktop window aswell as the Supervisor Desktop show "No service" at the bottom, this is the sam...
when we restart server the registration code is change.and we couldn't see server license
