I have a CME 3.2 2611XM w/ AIM-CUE software version 2.1.1. IOS version 12.3(11)T6. I for some reason get a lot of static one way on the 8 analog lines coming from the PSTN. Callers from the PSTN hear people on the CME fine but not the other way around. I have had SBC test the lines and they say they don't see anything. I have vad and comfort-noise turned off and I still get static. I was reading about have vad on a dialpeer and on the voice-port. All calls that come into the CME are routed to an Auto Attendant, then users dial the extension of the IP phone. For some reason the dial peer that it received is is just the first pots dial-peer how do I make it get a dial-peer I want it to get for incoming dial-peer. I am posting the config of cme and a show call active voice output. If there is anything anyone could help me with I am all ears. This has been an annoyance for a long time now.
