02-11-2010 09:36 PM - edited 03-13-2019 06:51 PM
Hi,
Im having problem to connect IP Communicator (either ver 2 or 7 )whenever using Cisco VPN Client 5.0.06.0160 for windows
the IPC didn't register to the CUCM
There's nothing showing on the screen
but whenever im using Anyconnect VPN Client, it works perfectly
The remote side is using ASA5505
Anyone can help ??
Thanks
02-17-2010 01:02 PM
It's probably an issue with the ASA configuration in your "group-policy
The other issue could be that your using different ip pools for ipsec and ssl vpn. The ip pool subnet that you might be giving out for ipsec might not be in your "no nat" acl.
Jason
03-04-2010 12:30 AM
Hi Jason,
Thanks for your reply.
I have checked that the group-policy for ipsec group and for webvpn has the same split tunnel network list and ip pool subnet
well i can reach the callmanager but however the IP Communicator can't register without any message to the Callmanager, I have set the TFTP Server and device name correctly on IPC
Any idea ?
David
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide