Ip Phone 7912 and CallManager 4.1

[aalejo]

Does the 7912 support more than two Calls in CallManager 4.1?

[thomas.chen]

This URL might help you:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item09186a00800a6763.shtml

[aalejo]

Nothing about 7912

[lfulgenzi]

I've got a copy of 4.1.3 running in the lab.

7912 DN configuration screen has similar multiple call/call waiting configuration options as the 7940.

Multiple Call / Call Waiting Settings

Maximum Number of Calls* [ ] (1 - 6)

Busy Trigger* [ ] (<= Max. Calls)

Only difference is a 7940/60 has a max of 196 calls.

[aalejo]

And works? Did you tested?

Sometimes IP Phones have configurations for future load release.

Thanks,

Alex

[lfulgenzi · Accepted solution]

Yup. Tested both incoming and outgoing. Works like a charm.

The interface and behaviour of the phone display when there are multiple calls in play however has quite a bit to be desired though. I didn't like it.

You should really test in a lab to see how it might fit in your environment, i.e. phone upgrades are required.

Lelio

P.S. Don't forget to rate posts if they help you out