10-03-2002 09:18 AM - edited 03-12-2019 09:02 PM
I have an AS5350 and am using 827-4V endpoints. The endpoints have their 4 FXS ports connected to analogue CO cards in small PBX´s. Port 1 has the company main number , ports 2 , 3 and 4 have other numbers.
The problem is that if a call to the main number is answered , another call to the main number is not possible - dialler gets busy tone . Is there ANY way to enable further calls to thye main number appear at (the) other ports ? Anything I can do with the dial peers ?
I guess what is needed is some kind of call processing --- call fwd on busy to port 2 etc , or a ring group of ports 1,2,3 etc.
Any advice is greatly appreciated ..
Thanks
Jerry
10-03-2002 10:35 AM
What if you set up identical dial-peers to the other ports with higher preferences (preference 0 is first choice and is default)?
10-03-2002 02:55 PM
Great , that seems to make sense ,
Thanks for the reply jcmartin , i will try this out and post the results ,
10-04-2002 08:43 AM
It works just fine - thanks jcmartin , you made my day.
One other thing I learned - if you dont do the "no gateway" command on the 827-4V before changing the config - it will crash and reload clean !! .
Have a good weekend.
10-15-2002 12:38 AM
Hi jbichard, what IOS do you have at your router?
I have the same crash problem with the 12.2(1)XD3.
Thanks
Isabel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide