11-12-2002 01:48 AM - edited 03-12-2019 09:31 PM
Does MRP on ICS7750 supports ISDN-PRI connection to integrate with legacy PBX for voice with IP telephony setup ?
We are using MRP on ICS7750 with VWIC-1MFT-E1 with sufficient DSP resources.
Solved! Go to Solution.
11-12-2002 05:50 AM
This should not be a problem - set the clock source on the controller and the correct isdn protocol-emulate
Please note this is supported for Q.931 switch types only. Q.Sig is not yet supported (and won't be until at least CallManager 3.3 with MGCP).
Regards,
Justin
11-12-2002 05:50 AM
This should not be a problem - set the clock source on the controller and the correct isdn protocol-emulate
Please note this is supported for Q.931 switch types only. Q.Sig is not yet supported (and won't be until at least CallManager 3.3 with MGCP).
Regards,
Justin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide