07-27-2003 10:43 PM - edited 03-13-2019 12:55 AM
Sh ccm-manager shows registered
In CM the vg200 with NM-2v says registered to CM
The NM-2v has 4fxs ports 2 cards with 2 FXS ports on on each card.
sh voice call summary shows port 1/1/1 is constantly connected.
When this shouldnt be the case.
When number is dialed we receive reorder tone.
rebooted the box to no avail same issue persisits.
ant suggestions
thankyou.
08-01-2003 08:12 AM
Try to add the command "progress_ind setup enable " to the voip dial peers and see if it works.
08-01-2003 11:46 PM
Hi,
I've had this issue before after a move, try removing the cable and reseating it then reboot box.
If this fails try swapping card with another thats working if you can and this will let you know if RMA is required.
Allan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide